how to remove Milwaukee battery M12

How To Remove Milwaukee Battery M12: 5 Quick Steps

Milwaukee battery removal is a straightforward operation. But it’s crucial to follow the exact procedure. Not following the correct way might end up damaging the battery.

To avoid potential damage, we should know how to remove Milwaukee Battery M12

Locate the battery release button of your specific tool. Firmly push to release the Milwaukee M12 batteries. Disengage the lock to slide the battery out. Ease into the process so the tool doesn’t crack. Inspect the battery properly for any physical or software damage. During the inspection, you’ll be able to determine whether to reset or replace. 

This is just a sneak peek of the whole discussion. Without wasting any more time let’s jump right into the article!

5 Quick Steps To Remove Milwaukee Battery M12

This is a brief outline of the step-by-step guide to removing the Milwaukee M12 batteries. 

It can be confusing whether you are a seasoned user or a professional enthusiast. Just follow the steps one by one.

Step 1 of 5: Locate the Release Button

The location of the release button can vary depending on the tool you’re using.

  • Make sure the machine is powered off for your safety.
  • Disconnect from any power source.
  • Find the release button and proceed to the next step. 

Step 2 of 5: Disengage The Lock

  • Push the release buttons to disengage the locks
  • Push firmly to disengage the lock

If this doesn’t disengage the batteries that means the lock is jammed. This can happen if the lock was unopened for a longer period of time. 

To disengage a jammed lock, use a screwdriver to open it. You can also use the oscillating tools. Make sure you use the oscillating tool for M12, not M18.

Make sure you are not using the tools harshly. It will crack the lock.

Step 3 of 5: Slide The Battery Out 

Once you have disengaged the battery lock, it’s time to remove it. 

  • Press the release buttons on the tool.
  • While pressing the buttons, pull out the battery pack.
  • To do that, grab the bottom of the battery.
  • Give the battery pack a short tug if it doesn’t come out.

If your battery pack is not coming out properly, don’t pull it out forcefully. Make sure the latch of your tool is not tightened. 

Note: Pulling the battery pack forcefully can end up damaging the latches. Better safe than sorry.

Slide The Battery Out 

Step 4 of 5: Battery Inspection 

Now, it’s time to inspect the batteries of your tool. 

  • Inspect for any visible damage, such as cracks or leaks on the batteries.
  • Exposure to moisture or excessive humidity can cause corrosion to these. 
  • Check the voltage of your batteries. Milwaukee M12 battery has a voltage of 12V and a capacity of 1.5, 2.0, and 3.0 Ah. Check the battery and compare the voltage. 
  • Check if the battery is holding the charge. Sometimes Milwaukee batteries don’t charge at all. 

If you inspect the battery pack properly you will come to a decision if you need to reset or replace the battery.

Step 5 of 5: Replace or Reset The Battery 

You might be confused about resetting or just changing the whole battery.

To get rid of the confusion, go through the overview.

Replace ifReset if
Degradation of capacity & runtimeDisplay of error and false indication.
Leaks & physical damage Software/Power related issues 
Battery & tool incompatibility Battery protection false activation 

Physical degradation of your battery can create a dangerous and hazardous situation. So check for any leaks or major damage.

Milwaukee M12 1.5 Ah compact has 35% more lifespan than a standard battery. So, check for the battery model and runtime to understand whether to replace or reset.

Milwaukee M12 1.5 Ah

Milwaukee M12 is compatible with selective tools. So make sure the tool you are using is compatible with the battery. Or else, you might need to replace it. 

If you are facing minor issues, it’s better to save a few bucks and reset your batteries. 

Milwaukee M12 can show a false indicator because of a glitch. You can watch this video if your battery is also flashing a Red light like the Dewalt lawn mower.

Milwaukee M12 also causes firmware or software related issues. It can go away through with the reset process. 

Make sure to check if the battery protection system is also at fault. It can automatically stop the batteries from charging. 

Now, if you decide to reset your Milwaukee M12, here’s how you can go through it easily. 

How To Reset Milwaukee Battery M12

Resetting the Milwaukee M12 battery is very simple. Here are some easy steps for you:

  1. Turn off all the power connections from the battery.
  2. Before you operate, wait for a few minutes. This will let the battery cool down. 
  3. Now, reconnect the battery to the tool you are using. You can also use the charger for this process. 
  4. Press and hold the power button of your tool or charger for 10 seconds. 

After doing the above the steps, your battery should be reset. However, if you are having trouble resetting your battery, check the latch connection. 

If your latch is securely locked yet the issue is not fixed, seek professional help.

Frequently Asked Questions (FAQs):

Can I use M8 batteries with M12 tools?

No, you cannot. M8 batteries are designed to power all the M18 cordless power tools. M12 tools will also have compatibility issues with M8 batteries. Moreover, both batteries have different voltage and sizes.

What is the warranty period for Milwaukee M12 batteries?

The warranty period of your Milwaukee M12 varies depending on your battery pack and region. USA and Сanada has 3 year warranty period, European union has 12 months. The Redlithium pack has 2 year warranty. 

How long do the Milwaukee M12 batteries last?

The lifespan of a Milwaukee M12 battery depends on the maintenance, usage, and the model of the battery pack. Generally, Milwaukee M12 comes with a 3 years warranty. 

Final Verdict

With that, you can understand the whole process of how to remove Milwaukee batteries M12. Following this article should solve your problem easily. But if you still find it hard to do, you can contact the Milwaukee customer support.

2 thoughts on “How To Remove Milwaukee Battery M12: 5 Quick Steps”

  1. Pingback: Decoding The Mystery: Milwaukee Sawzall Light Flashes 3 Times

  2. Pingback: M12 VS M18 Oscillating Tool: The Righ One for You

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top