DWV010 or DWV012

DWV010 or DWV012 – Which One to Choose?

DeWalt equipment is famous for its durability and quality throughout the brand’s lifetime. So, no dust extractor can be as good as DeWalt’s. 

But there are many options packed with different features and specifications. And there you might end up scratching your head hard.

So, which one to choose, dwv010 or dwv012?

They both are packed with 15 AMPS power with a hose length of 15 ft each. But in terms of max CFM DWV012 has a slight edge over DWV010. DWV012 also has a bigger tank and is packed with variable suction control features. Both have HEPA filters while DWV012 is heavier and pricer than DWV010.

Confused? Don’t worry! I got your back! This detailed comparison guide will guide you through and help you decide to choose.

So, without further ado, let’s get started!

DWV010 vs DWV012 – A Brief Comparison

Source: https://toolsinaction.com/

DWV010 and DWV012 both are amazing dewalt automatic dust extractor. These two are very similar in terms of their usage and specifications. 

Still, there are some differences but not as much as between Jet and PowerMatic jointers. This is why you should give it a thought before purchasing any of them.

To make things easier for you here we have created a table. The table represents a brief comparison between these two dust extractors.

Max CFM140155
Power Cord8 ft15 ft
Tank Size8 Gallon10 Gallon
Variable Suction ControlNoYes
HEPA FilterYesYes
Weight21 lbs33.5 lbs

Still not sure which one to pick? Don’t worry! I’ve given an in-depth comparison of these two goods down below along with a graph chart. Take a quick look again-

Keep reading to understand all the factors in detail. In case you need a decision right now, check the “which one is more suitable” section right away.

DWV010 vs DWV012 – An In-Depth Comparison

Source: https://www.ubuy.co.it/

The dewalt dwv010 is like the little brother of DWV012. The DWV012 was released first and then after two years, DWV010 was released.

Now that I’ve short-listed the factors to consider, we can go one by one. You can consider every factor to decide whether you should choose dewalt dwv010 or dwv012.

So, let’s jump right into the details!


AMPS in simple words is the electricity consumption of the machine. An adequate amount of amp is very crucial for a dust extractor to function properly. Any amount of amp around 9 or more than that is good.

A higher amount of amp means the machine is fed with a higher amount of power.

But DWV010 and DWV012 both of the vacuums have 15 AMPS of power. This is quite a decent amount of amp that can generate a lot of suction power.

Nevertheless, I use an automatic vacuum switch with my dust extractor. The function of this tool is to deter circuit overload. Also it eliminates circuit breaker tripping. So, according to me it’s a very beneficial tool for medium-sized workloads. I’m mentioning the one I’ve got for me and another suggestion that I found quite good:

Etoolscity Automatic Vacuum Switch
Ortis Automatic Vacuum Switch

Now, as you’ve seen already there isn’t any difference here. So it’s a tie between the two extractor when it comes to power consumption.

Winner: Draw

Hose Length

Source: https://www.acmetools.com

Sometimes the hose length of the dust extractor just makes your life easier. Imagine not being able to move your vacuum because of the short length of the hose. It can be quite frustrating.

DWV010 and DWV012 both have a hose length of 15 ft. This provides better mobility in a time of dust extracting. 

So far both of the vacs have been on par with each other. But now things might change, so keep going.

However, at a point if you think the hose needs to be changed then you can easily do it. Because DeWalt also has options of replacement hose.

Winner: Draw


The CFM number represents the amount of air that’s moved per minute. CFM stands for cubic feet per minute. In simple terms, it shows the amount of airflow a vac can create. 

The higher the number, the higher the airflow or suction ability. Check the dwv010 manual to get a better idea about CFM.

In both DWV010 and DWV012, the max CFM is quite good. But the DWV012 has a slight edge here. The DWV010 has a max CFM of 140 whereas the DWV012 has a CFM of 155.

This means the DWV012 can create more airflow than DWV010. Simply said, DWV012 is more powerful than DWV010.

Keep in mind that the DWV012 is just slightly ahead. 140 CFM is a very good number for a dust extractor.

Winner: DWV012

Source: https://www.burnstools.com

Power Cord

The DWV010 has an 8ft long power cord whereas the DWV012 has a 15 ft power cord. This factor is largely connected with the convenience of the user according to his situation.

Having a lengthier power cord is always better. It just gives you more freedom while cleaning or using your vac.

A shorter power cord can limit you and can be quite troublesome in specific situations. Like, a low number of power outlets along with a short power cord can be troubling.

So DWV012 just gives you that extra freedom to work around every situation.

So while trying to cover a larger area, the short power cord can be problematic. But there is an easy way around it too. That’s using an extended cord. 

You may also make use of some DeWalt hand tools if you need to disassemble your extractor.

Winner: DWV012

DEWALT Wet-Dry Vacuum / Dust Extractor, 10-Gallon, HEPA/RPR (DWV012)

  • Automatic Filter Clean of the dust extractor pulses every 30 seconds for continuous operations without stopping to clean filter
  • Powerful 15 amp motor of DEWALT dust extractor delivers 155 CFM of airflow for maximum suction
  • Power Tool Actuation controls the On/Off operations of the vacuum with a power tool
  • Meets the EPA Lead Related Renovations, Repair and Painting (RRP) rule for HEPA vacuum only when DWV9330 Filter is used (Filter included with unit)
  • Variable suction controls vacuum’s power consumption and amount of suction
  • Telescoping handle for easy transport
  • Universal hose connector provides a robust connection with swivel capability
  • Lightweight and portable weighing in at only 33.5 lbs
  • Heavy-duty wheels and casters provide job-site durability
  • Multiple lift and tie down points to secure vac to scaffolding or during transportation

Tank Size

Tank size represents the amount of dust the extractor can collect. 

The DWV010 has a tank size of 8 gallons while DWV012 has a tank size of 10 gallons. So, you can collect more dust with DWV012 before you need to worry about unloading it.

Tank size can be a deciding factor behind your purchasing decision. Having an extra bit of space and room to work with is always better. 

So the winner is pretty clear here.

Winner: DWV012

Suction Control

The variable suction control is a feature that can make your cleaning work more efficient. It also increases the adaptability of the machine.

You can control the suction power according to your need. In situations where you need lower suction power, you can just lower it with the switch. This way it will consume less energy and as a result, be more efficient.

This feature is exclusively put in DWV012 but not in DWV010.

Winner: DWV012

HEPA Filter

Source: https://www.all-wall.com/

The Hepa filter is one of the unique features of these two vacs. DWV010 and DWV012 both have two HEPA filters each. You might already know the function of the HEPA filters. 

Both of these vacs use DeWalt’s DWV9330 filter.

The HEPA filter is known to remove at least 99.97% of any airborne particles. This is an amazing feature.

Winner: Draw

DEWALT Dust Extractor, Automatic Filter Cleaning, 8-Gallon (DWV010)

  • Automatic Filter Clean of the dust extractor pulses every 30 seconds for continuous operation without stopping to clean filter
  • 15-amp motor of DEWALT dust extractor delivers 150 CFM of airflow
  • Power Tool Actuation controls the On/Off operations of the vacuum with a power tool
  • Meets the EPA Lead Related Renovations, Repair and Painting (RRP) Rule for Hepa Vacuums only when DWV9330 Filters are used
  • Universal hose connector provides a secure connection with swivel capability
  • Heavy duty wheels and casters provide jobsite durability
  • 15 ft. Anti Static Hose. Hose Diameter-1.25 inch


As we have already said, DWV010 is just a smaller version of DWV012. So it’s obvious that it will be lighter. 

The DWV010 weighs around 21 lbs while DWV012 weighs around 33.5 lbs. This extra weight is justified by its larger tank size as well.

But the convenience factor of lightweight equipment is undeniably an important one.

Winner: DWV010


The DWV010 is priced at approximately 420$ in the market. On the contrary, the DWV012 is priced at around 630$. Which can be quite a big price jump for many.

If we think about the additional benefits and features it can be justified. But the price difference is still quite big.

So, the winner in this section is…drum roll…well you already figured that out, don’t you?

Winner: DWV010

Which One is More Suitable?

Okay, so after all the comparisons it’s quite clear that DWV012 is way ahead. But it’s also true that the price difference is quite big.

But if budget is not a problem for you then going for DWV012 will be the better idea. You can also check more dwv012 review to get a better idea.

On the other hand, if you want a more minimalistic vac then DWV010 is better. DWV010 weighs less and also has a lower tank size which reduces its size. After all, if DWV010 ticks all the boxes you’re looking for then go for it.

Additionally, from an efficiency viewpoint DWV012 can be a good choice. Because of its variable suction control.

So, here’s the sum-up of all our comparisons:

Product NameWhy is it good?
DWV010Low budget, Minimalistic, Lightweight
DWV012Efficient, More convenient, and powerful


Do the vacs have automatic filter cleaning?

Yes, both of the vacs have the feature of automatic filter cleaning pulses. This feature cleans the filter with a pulse every 30 seconds. It continuously cleans the filter without needing the vac to turn off.

What does a wet/dry vac mean?

A wet/dry vac means it can suck in both wet and dry debris. These vacs don’t use bags to collect the dust. Instead, they use two different compartments for wet spills and dry dust.

Can I replace the HEPA filters if needed?

Yes, you can replace the HEPA filters when you need to. You can buy it from the official DeWalt website using the given model number. You can also find a replacement HEPA filter from any online store.

Wrap Up!

We hope that now you know which one to choose, dwv010 or dwv012. 

Before selecting the one for you, understand your priorities and then decide. If you have any further queries then do let us know.

Hope to see you at the next one! Good luck!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top